You are here

Combat Archery Authorization Self-Test

You got 16 of 25 possible points.
Your score was: 64 %

Question Results

The following answers were incorrect:

Score 0 of 1

Question:

What should a combat archer do with their bow/crossbow during a hold? Can a crossbow remain cocked?

Response:

a. Lower the bow/crossbow so that the ammunition is pointing at the ground; yes.

b. Remove the ammunition and set the bow/crossbow on the ground; no.

c. Remove the ammunition and hold the bow/crossbow in a safe position; yes.

d. Remove the ammunition and hold the bow/crossbow in a safe position; no.

Score 0 of 1

Question:

Which of the following does the Middle Kingdom require for labels on Combat Archery Ammunition?

Response:

a.    Group ammunition only needs the group and Kingdom on the label.

b.   Labels must include the archer's membership number.

c.    Labels must have the archer's local group and kingdom.

d.   If a group name is used on the label, there must also be an individual point of contact.

Score 0 of 1

Question:

How are heavy bows/crossbows identified? Can you shoot fiberglass-shafted ammunition out of a heavy bow/crossbow?

Response:

a. Red markings on both limbs of the bow/crossbow: Yes.

b. Red marking on both limbs of the bow/crossbow; No.

c. Red markings on one limb of the bow/crossbow; Yes

d. c. Red markings on one limb of the bow/crossbow; No.

Score 0 of 1

Question:

When can a Combat Archer pick up and use tubular ammunition from the ground?

Response:

a. Never.

b. Anytime the scenario allows gleaning.

c. Only if the scenario allows it and the archer has properly re-inspected it before using it.

d. Only if it was dropped unfired.

Score 0 of 1

Question:

What are the maximum allowed lengths for all Combat Archery ammunition? Can an arrow be shorter than the maximum length?

Response:

a. 26 inches maximum; NO.

b. 26 inches maximum; YES.

c. 28 inches maximum; NO.

d. 28 inches maximum; YES

Score 0 of 1

Question:

What are the minimum hand and wrist armor requirements for Combat Archers? (and siege engineers, and fighters using thrown weapons)

Response:

a. Full gauntlets

b. Half gauntlets

c. Leather gloves

d. Street hockey gloves

Score 0 of 1

Question:

What are the minimum and maximum allowed lengths for all Combat Archery crossbow bolts?

Response:

a. 12 inches minimum and 28 inches maximum.

b. No minimum and 26 inches maximum.

c. No minimum and 28 inches maximum.

d. 12 inches minimum and 26 inches maximum.

Score 0 of 1

Question:

Can CA arrows and crossbow bolts be blocked?

Response:

a. Yes, but only by shields (and pavises). 

b. Yes, but only by armored combat weapons. 

c. Yes, by both shields (and pavises) and armored combat weapons.

d. No.

Score 0 of 1

Question:

If gleaning is allowed in the scenario, what must the archer do before firing tubular ammunition picked up from the ground?

Response:

a. Nothing. Tubular ammo can be re-fired at any time

b. Make sure the tail is round, the head is secure and undamaged, and the tube is clear of debris.

c. Make sure the head is red and securely attached and the label is correct

d. Make sure the tail is round and the label is correct.