You are here

Combat Archery Authorization Self-Test

You got 17 of 25 possible points.
Your score was: 68 %

Question Results

The following answers were incorrect:

Score 0 of 1

Question:

Fiberglass shaft ammunition in the Middle Kingdom must have what kind of head? It must have what kind of APD (Anti-Penetration Device)?

Response:

a. Any style of Baldar Blunt; Cil-O-Flex tubing APD

b. Any style of Baldar Blunt; Baldar Asgard APD.

c. Baldar Fathead Blunt; Sil-O-Flex tubing APD.

d. Baldar Fathead Blunt; Baldar Asgard APD.

Score 0 of 1

Question:

What are the minimum and maximum allowed lengths for all Combat Archery crossbow bolts?

Response:

a. 12 inches minimum and 28 inches maximum.

b. No minimum and 26 inches maximum.

c. No minimum and 28 inches maximum.

d. 12 inches minimum and 26 inches maximum.

Score 0 of 1

Question:

There should be a buffer zone around the combat area whenever combat archer is in use. What direction(s) can a combat archery safely shoot?

Response:

a. Any direction, as long as he is standing inside the buffer zone.

b. Anywhere along the edge of the buffer zone.

c. Any direction into the combat area.

d. Any direction allowed by the scenario that will not allow a missed or deflected shot to get beyond the buffer zone and will not risk hitting a marshal.

Score 0 of 1

Question:

Before picking up or drawing a backup weapon in the Middle Kingdom, what must a Combat Archer use do with his bow or crossbow?

Response:

a. Nothing, except to make sure that a crossbow is not cocked. A combat archer may hold his bow/crossbow while using a backup weapon.

b. Both bows and crossbows must be laid aside, but they can remain in the combat area.

c. Both bows and crossbows must be placed outside the combat area or handed to another person.

d. Bows must be laid aside in any safe location. Crossbows must be placed outside the combat area or handed to another person.

Score 0 of 1

Question:

When can a Combat Archer pick up and use fiberglass shafted ammunition from the ground?

Response:

a. Never.

b. Any time the scenario allows gleaning.

c. Only if the scenario allows it and the archer has properly re-inspected it before using it.

d. Only if it was dropped unfired.

Score 0 of 1

Question:

What are the minimum hand and wrist armor requirements for Combat Archers? (and siege engineers, and fighters using thrown weapons)

Response:

a. Full gauntlets

b. Half gauntlets

c. Leather gloves

d. Street hockey gloves

Score 0 of 1

Question:

How are heavy bows/crossbows identified? Can you shoot fiberglass-shafted ammunition out of a heavy bow/crossbow?

Response:

a. Red markings on both limbs of the bow/crossbow: Yes.

b. Red marking on both limbs of the bow/crossbow; No.

c. Red markings on one limb of the bow/crossbow; Yes

d. c. Red markings on one limb of the bow/crossbow; No.

Score 0 of 1

Question:

What are the valid target areas for Combat Archery arrows and bolts? How hard do they need to hit?

Response:

a. All target areas; same amount of force as an effective blow from a hand-held weapon.

b. All target areas; less force than an effective blow from a hand-held weapon.

c. Same target areas as thrusting tips; same amount of force as an effective blow from a hand-held weapon.

d. Same target areas as thrusting tips; less force than an effective blow from a hand-held weapon.