You are here

Combat Archery Authorization Self-Test

You got 14 of 25 possible points.
Your score was: 56 %

Question Results

The following answers were incorrect:

Score 0 of 1

Question:

What are the minimum hand and wrist armor requirements for Combat Archers? (and siege engineers, and fighters using thrown weapons)

Response:

a. Full gauntlets

b. Half gauntlets

c. Leather gloves

d. Street hockey gloves

Score 0 of 1

Question:

What are the maximum allowed lengths for all Combat Archery ammunition? Can an arrow be shorter than the maximum length?

Response:

a. 26 inches maximum; NO.

b. 26 inches maximum; YES.

c. 28 inches maximum; NO.

d. 28 inches maximum; YES

Score 0 of 1

Question:

What is the minimum distance at which a combat archer can shoot at an opponent?

Response:

a. 6 feet

b. 10 feet

c. There is no minimum distance, but the arrow or bolt must completely clear the limb of the bow or the prod of the crossbow before striking the target to be considered good.

d. There is no minimum distance.  The ammunition does not need to clear the weapon to be considered good.

Score 0 of 1

Question:

How are heavy bows/crossbows identified? Can you shoot fiberglass-shafted ammunition out of a heavy bow/crossbow?

Response:

a. Red markings on both limbs of the bow/crossbow: Yes.

b. Red marking on both limbs of the bow/crossbow; No.

c. Red markings on one limb of the bow/crossbow; Yes

d. c. Red markings on one limb of the bow/crossbow; No.

Score 0 of 1

Question:

What are the minimum and maximum allowed lengths for all Combat Archery crossbow bolts?

Response:

a. 12 inches minimum and 28 inches maximum.

b. No minimum and 26 inches maximum.

c. No minimum and 28 inches maximum.

d. 12 inches minimum and 26 inches maximum.

Score 0 of 1

Question:

What should a combat archer do with their bow/crossbow during a hold? Can a crossbow remain cocked?

Response:

a. Lower the bow/crossbow so that the ammunition is pointing at the ground; yes.

b. Remove the ammunition and set the bow/crossbow on the ground; no.

c. Remove the ammunition and hold the bow/crossbow in a safe position; yes.

d. Remove the ammunition and hold the bow/crossbow in a safe position; no.

Score 0 of 1

Question:

Where can you find the instructions for making Middle Kingdom Combat Archery ammunition?

Response:

a. Middle Kingdom Combat Archery Rules.

b. Society Marshal’s Handbook. 

c. The 35-Foot Spear website.

d. Middle Kingdom Armored Combat Handbook.

Score 0 of 1

Question:

Fiberglass shaft ammunition in the Middle Kingdom must have what kind of head? It must have what kind of APD (Anti-Penetration Device)?

Response:

a. Any style of Baldar Blunt; Cil-O-Flex tubing APD

b. Any style of Baldar Blunt; Baldar Asgard APD.

c. Baldar Fathead Blunt; Sil-O-Flex tubing APD.

d. Baldar Fathead Blunt; Baldar Asgard APD.

Score 0 of 1

Question:

If gleaning is allowed in the scenario, what must the archer do before firing tubular ammunition picked up from the ground?

Response:

a. Nothing. Tubular ammo can be re-fired at any time

b. Make sure the tail is round, the head is secure and undamaged, and the tube is clear of debris.

c. Make sure the head is red and securely attached and the label is correct

d. Make sure the tail is round and the label is correct.

Score 0 of 1

Question:

11. What kind(s) of tips are legal on tubular ammunition in the middle Kingdom?

Response:

a. Any Rubber Stoppers of the right size.

b. Any rubber stoppers of the right size with a 1/4 inch or 3/8 inch hole.

c. Modified classic Balder Blunts.

d. Only b and c.

Score 0 of 1

Question:

When are armored combatants engaged with a combat archer?

Response:

a. At all times when they are on the field with a combat archer. 

b. Only when they are in range of the archer.

c. Only when they are facing the archer. 

d. Both b and c.