You are here

Combat Archery Authorization Self-Test

You got 15 of 25 possible points.
Your score was: 60 %

Question Results

The following answers were incorrect:

Score 0 of 1

Question:

How are heavy bows/crossbows identified? Can you shoot fiberglass-shafted ammunition out of a heavy bow/crossbow?

Response:

a. Red markings on both limbs of the bow/crossbow: Yes.

b. Red marking on both limbs of the bow/crossbow; No.

c. Red markings on one limb of the bow/crossbow; Yes

d. c. Red markings on one limb of the bow/crossbow; No.

Score 0 of 1

Question:

What is the minimum distance at which a combat archer can shoot at an opponent?

Response:

a. 6 feet

b. 10 feet

c. There is no minimum distance, but the arrow or bolt must completely clear the limb of the bow or the prod of the crossbow before striking the target to be considered good.

d. There is no minimum distance.  The ammunition does not need to clear the weapon to be considered good.

Score 0 of 1

Question:

What kind(s) of marshal(s) can run a Combat Archery authorization:

Response:

a. Any heavy weapons marshal.

b. Any combat archery marshal.

c. A heavy weapons or combat archery marshal who is authorized in combat archery.

d. All the above.

Score 0 of 1

Question:

Once “HOLD” has been called, when can an archer nock an arrow or put a bolt in their crossbow?

Response:

a. Any time, as long as the ammunition is pointing at the ground.

b. As soon as “on your guard” or “make ready” (or equivalent) has been called.

c. Not until “lay on” has been called.

d. Doesn’t matter.

Score 0 of 1

Question:

What are the minimum and maximum allowed lengths for all Combat Archery crossbow bolts?

Response:

a. 12 inches minimum and 28 inches maximum.

b. No minimum and 26 inches maximum.

c. No minimum and 28 inches maximum.

d. 12 inches minimum and 26 inches maximum.

Score 0 of 1

Question:

When can a Combat Archer pick up and use fiberglass shafted ammunition from the ground?

Response:

a. Never.

b. Any time the scenario allows gleaning.

c. Only if the scenario allows it and the archer has properly re-inspected it before using it.

d. Only if it was dropped unfired.

Score 0 of 1

Question:

Which of the following does the Middle Kingdom require for labels on Combat Archery Ammunition?

Response:

a.    Group ammunition only needs the group and Kingdom on the label.

b.   Labels must include the archer's membership number.

c.    Labels must have the archer's local group and kingdom.

d.   If a group name is used on the label, there must also be an individual point of contact.

Score 0 of 1

Question:

Fiberglass shaft ammunition in the Middle Kingdom must have what kind of head? It must have what kind of APD (Anti-Penetration Device)?

Response:

a. Any style of Baldar Blunt; Cil-O-Flex tubing APD

b. Any style of Baldar Blunt; Baldar Asgard APD.

c. Baldar Fathead Blunt; Sil-O-Flex tubing APD.

d. Baldar Fathead Blunt; Baldar Asgard APD.

Score 0 of 1

Question:

What are the valid target areas for Combat Archery arrows and bolts? How hard do they need to hit?

Response:

a. All target areas; same amount of force as an effective blow from a hand-held weapon.

b. All target areas; less force than an effective blow from a hand-held weapon.

c. Same target areas as thrusting tips; same amount of force as an effective blow from a hand-held weapon.

d. Same target areas as thrusting tips; less force than an effective blow from a hand-held weapon.

 
Score 0 of 1

Question:

What should a combat archer do with their bow/crossbow during a hold? Can a crossbow remain cocked?

Response:

a. Lower the bow/crossbow so that the ammunition is pointing at the ground; yes.

b. Remove the ammunition and set the bow/crossbow on the ground; no.

c. Remove the ammunition and hold the bow/crossbow in a safe position; yes.

d. Remove the ammunition and hold the bow/crossbow in a safe position; no.