You are here

Combat Archery Authorization Self-Test

You got 19 of 25 possible points.
Your score was: 76 %

Question Results

The following answers were incorrect:

Score 0 of 1

Question:

What are the maximum allowed lengths for all Combat Archery ammunition? Can an arrow be shorter than the maximum length?

Response:

a. 26 inches maximum; NO.

b. 26 inches maximum; YES.

c. 28 inches maximum; NO.

d. 28 inches maximum; YES

Score 0 of 1

Question:

What are the minimum and maximum allowed lengths for all Combat Archery crossbow bolts?

Response:

a. 12 inches minimum and 28 inches maximum.

b. No minimum and 26 inches maximum.

c. No minimum and 28 inches maximum.

d. 12 inches minimum and 26 inches maximum.

Score 0 of 1

Question:

11. What kind(s) of tips are legal on tubular ammunition in the middle Kingdom?

Response:

a. Any Rubber Stoppers of the right size.

b. Any rubber stoppers of the right size with a 1/4 inch or 3/8 inch hole.

c. Modified classic Balder Blunts.

d. Only b and c.

Score 0 of 1

Question:

How are heavy bows/crossbows identified? Can you shoot fiberglass-shafted ammunition out of a heavy bow/crossbow?

Response:

a. Red markings on both limbs of the bow/crossbow: Yes.

b. Red marking on both limbs of the bow/crossbow; No.

c. Red markings on one limb of the bow/crossbow; Yes

d. c. Red markings on one limb of the bow/crossbow; No.

Score 0 of 1

Question:

Once “HOLD” has been called, when can an archer nock an arrow or put a bolt in their crossbow?

Response:

a. Any time, as long as the ammunition is pointing at the ground.

b. As soon as “on your guard” or “make ready” (or equivalent) has been called.

c. Not until “lay on” has been called.

d. Doesn’t matter.

Score 0 of 1

Question:

If gleaning is allowed in the scenario, what must the archer do before firing tubular ammunition picked up from the ground?

Response:

a. Nothing. Tubular ammo can be re-fired at any time

b. Make sure the tail is round, the head is secure and undamaged, and the tube is clear of debris.

c. Make sure the head is red and securely attached and the label is correct

d. Make sure the tail is round and the label is correct.